![]() If running CentOS 7, download this script and run it to install needed liberaies not automatically included in a default CentOS 7 installation.Please note that this version of the gpibserver is now deprecated and you should consider using the linux_gpib_socket server instead. If using the GPIB driver supplied by National instruments, download gpib_socket-2.13.tgz.Gnu 'make' Other 'make' packages than the one from Gnu may also work, but has not been tested.Ī GPIB interface card (not required for gpib_serial_emulator_server) The Perl (R) interpreter version 5.8.8 or later. Only tested with CentOS-6 and later, but will likely work on other Linux type system as well. Note however, that this mode of operation requires the serial-socket-server-9.0.pl program supplied by RFCcontrol or Elchemea Data Aquisition in order to function properly!īelow is a list of requirements (for all three versions)Ī Linux type operating system. In this case no GPIB-card or driver is nescesarry as that server maps gpib comands to serial interfaces. The other version is to be used in combination with the linux_gpib open source GPIB driver distrbuted by .Ī third option is to use serial communication and use the gpib_serial_emulator_server. The GPIB server handles request through a tcp-IP socket interface making communication between applications and hardware simple.īoth are implemented in C and one is to be used if the GPIB driver supplied by National Instruments is to be used. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.The GPIB server supplied by DTU Energy is intended to handle all communications between user applications and actual GPIB intraface cards and connected devices. This device is completely IEEE 488.2 compatible. With no GPIB cable required for instrument connection, you can use the Hi‑Speed USB port to control up to 14 programmable GPIB instruments. The GPIB‑USB‑HS achieves maximum IEEE 488.2 performance. USB, IEEE 488 GPIB Instrument Control Device-The GPIB‑USB‑HS is an IEEE 488 controller device for computers with USB slots. The devices are completely IEEE 488.2 compatible, have industry-standard transfer rates, and offer easy system configuration through NI software. GPIB Instrument Control Devices include a license for the NI-488.2 driver software, providing maximum reliability for connecting to third-party instruments via GPIB. Some models can control multiple GPIB devices, and others offer sustained data transfer rates and no microprocessor interruption in data transfers. GPIB Instrument Control Devices offer IEEE 488 controllers that are compatible with ExpressCard, PMC, PCMCIA, PCIe, PCI, and USB slots as well as Ethernet, RS485, RS422, and RS232 ports. Integrates an instrument into your system using a GPIB interface. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |